News

  • Unipatch awarded Indian's achiever's award for Industry Development.

Rubber Hog Tools

SSG (Patent No. 3,918, 217) Tooth size Comparison. It is impossible to make a direct comparison between the SSG cutting tooth sizes and the various sizes of relatively crude cooper brazed "carbide grits". However, the following size comparison will help you select the appropriate tooth size for a particular tool. SSG #330 and #390 replaces #16 Grit. SSG #230 replaces # 3 and #36 Grit. SSG #170 replaces #60 and more fine Grit sizes. Omni's assortment of Rubberhog tools is designed to provide a cool, efficient cutting action which results in an unscorched surface; ideal for obtaining strong rubber-to-rubber bonds. The wide open spacing structure provides necessary cutting clearance and allows the teeth to cut off chips of rubber without loading. The teeth are manufactured to operate at a uniform cutting radius that provides a surface free of coarse grooves or ridges.

 

FLARED CONTOUR WHEELS
Cat. No. Diameter Width Hole/Shaf SSG
RH-106 21/2", 65mm 1 ", 25mm 3/8", 9mm 170
RH-108 21/2", 65mm 1 ", 25mm 3/8", 9mm 230
RH-110 21/2", 65mm 1 ", 25mm 3/8", 9mm 390
RH-118 31/2", 90mm 11/2", 40mm 3/8", 13mm 170
RH-120 31/2", 90mm 11/2", 40mm 3/8", 13mm 230
RH-122 31/2", 90mm 11/2", 40mm 3/8", 13mm 390

ROUND FACED BUZZOUT WHEELS
Cat. No. Diameter Width Hole/Shaf SSG
RH-300 2", 50mm 1/4", 6mm 3/8", 24 Thread 230
RH-302 2", 50mm 1/4", 6mm 3/8", 24 Thread 390
RH-304 2", 50mm 3/8", 10mm 3/8", 24 Thread 230
RH-306 2", 50mm 3/8", 10mm 3/8", 24 Thread 390
RH-308 2", 50mm 1/2", 13mm 3/8", 24 Thread 230
RH-310 2", 50mm 1/2", 13mm 3/8", 24 Thread 390
RH-312 2", 50mm 3/4", 20mm 3/8", 24 Thread 230
RH-314 2", 50mm 33/4", 20mm 3/8", 24 Thread 390

POLYURETHANE INSERTS FOR FLARED CONTOUR WHEELS
Cat. No. Diameter Width Hole/Shaf SSG
RH-152 21/2", 65mm 3/8", 9mm    
RH-156 31/2", 90mm 1/2", 13mm    

TAPERED CONES
Cat. No. Diameter Width Hole/Shaf SSG
RH-505 7/8", 25mm 2", 50mm 3/8", 24 Thread 230
RH-507 7/8", 25mm 2", 50mm 3/8", 24 Thread 390
RH-509 7/8", 25mm 4", 100mm 3/8", 24 Thread 230
RH-511 7/8", 25mm 4", 100mm 3/8", 24 Thread 390

BALLS
Cat. No. Diameter Width Hole/Shaf SSG
RH-551 11/8", 30mm   3/8", 24 Thread 230
RH-553 11/8", 30mm   3/8", 24 Thread 390
RH-601 5/8", 15mm   1/4", 6mm 330
RH-603 7/8", 25mm   1/4", 6mm 330

TAPERS
Cat. No. Diameter Width Hole/Shaf SSG
RH-611 5/8", 15mm 1 ", 25mm 1/4", 6mm 330
RH-613 7/8", 25mm 11/4", 30mm 1/4", 6mm 330

ROTOR SAW
Cat. No. Diameter Width Hole/Shaf SSG
RH-619 13/8", 35mm 1/4", 6mm 1/4", 6mm 33

PENCIL RASPS
Cat. No. Diameter Width Hole/Shaf SSG
RH-625 1/4", 6mm 3", 75 mm 1/4", 6mm 230
RH-626 5/16", 7mm 3", 75 mm 1/4", 6mm 330
RH-627 3/8", 10mm 3", 75 mm 1/4", 6mm 330

Stones

They are used to remove all loose steel wires around a tyre injury in steel constructed tyres. They come in pencil, conical and mushroom shapes.

 

ALUMINUIM OXIDE STONES
Cat. No. Description Max. RPMs
S-872 Pencil Stone, 11/16", 25mm long mounted on a 1/4", 6mm shaft 47,000
S-873 Mushroom Stone, 15/8", 40mm dia mounted on a 1/4", 6mm shaft 23,500
S-875 Conical Stone, 11/8", 20mm wide mounted on a 1/4", 6mm shaft 33,500
S-879 Mushroom Stone, 11/4", 30mm dia mounted on a 1/4", 6mm shaft 30,500

Regroovers

 

REGROOVERS/BLADES AND ACCESSORIES
Cat. No. Description
S125B
(110V)

REGROOVER. 250 watt H.D. Pistol Grip Regroover for cutting tread design into repaired tire.
Comes with one #4 head and tewelve #4 blades 110volts.
S125B-220
220		 Same as S125B except 220 volts.
Does not include electrical plug.
HEAD S125 REGROOVER HEADS, specify size and type when ordering. Use matching size head and blade together.
S130 Standard heads, No. 1-5
S131 Large heads, No. 6-12
S145A
(110V)		 REGROVEER FOR cutting tread design into repaired tire.
Complete with heat adjustable transformer for reliable cutting speed and control, 110 volts.
Does not include electrical plug.
S145B
(220V)		 Same as S145 except 220 volts.
Does not include electrical plug.
S145/AW ALLEN WRENCH FOR REGROOVER

REGROOVERS BLADES
S145/R-1 rd, 5/64", 2mm cutting width S130-1
S145/R-2 rd, 1/8", 3mm cutting width S130-2
S145/R-3 rd, 13/64", 5mm cutting width S130-3
S145/R-4 rd, 9/32", 7mm cutting width S130-4
S145/R-5 rd, 23/64",9mm cutting width S130-5
S145/W-1 wide, 5/64",2mm cutting width S130-1
S145/W-2 wide, 5/32",4mm cutting width S130-2
S145/W-3 wide, 1/4",6mm cutting width S130-3
S145/W-4 wide, 5/16",8mm cutting width S130-4
S145/W-5 wide, 13/32",11mm cutting width S131-6
S145/W-6 wide, 7/8",22mm cutting width S131-12

Buffing Wheels and Rasps

Omni Tungsten Carbide Buffing Wheels and cups are made to an air-cooled design. This air-cooled design permits faster, cooler and cleaner buffing of rubber and helps eliminate burning the glazing of rubber. Omni Tungsten Carbide Rasps are ideal for skiving out small hole type injury in tyres.

 

ROUND FACED RASPS
Cat. No. or Length Width Hole Grit
S-2000 2", 50 mm 1/4", 6 mm 3/8", 24 Thread 16
S-2001 2", 50 mm 1/4", 6 mm 3/8", 24 Thread 36
S-2002 2", 50 mm 1/2", 13 mm 3/8", 24 Thread 16
S-2003 2", 50 mm 1/2", 13 mm 3/8", 24 Thread 36
S-2004 2", 50 mm 3/4", 20 mm 3/8", 24 Thread 16
S-2005 2", 50 mm 3/4", 20 mm 3/8", 24 Thread 36
S-2004 2", 50 mm 1/8", 3 mm 3/8", 24 Thread 16
 
PENCIL RASPS
Cat. No. or Length Width Hole Grit
S-2006 21/2", 65 mm 1/4", 6 mm - 16
S-2007 21/2", 65 mm 1/4", 6 mm - 36
 
TAPERED CONE RASPS
Cat. No. or Length Width Hole Grit
S-2008 4", 100 mm 3/4", 20 mm 3/8", 24 Thread 16
S-2009 4",100 mm 3/4", 20 mm 3/8", 24 Thread 36
S-2010 2", 50 mm 1", 25 mm 3/8", 24 Thread 16
S-2011 2", 50 mm 1", 25 mm 3/8", 24 Thread 36
 
CONTOUR CUPS
Cat. No. or Length Width Hole Grit
S-2020 3", 75 mm 11/2", 40 mm 3/8", 9 mm 36
S-2021 3", 75 mm 11/2", 40 mm 3/8", 9 mm 60
S-2022 4",100 mm 11/2", 40 mm 1/2", 13 mm 36
S-2023 4",100 mm 11/2", 40 mm 1/2", 13 mm 60

Gouges

Omni cutting gouges have lightweight construction and designed to facilitate a cool running operation to enhance performance.The razor like surface quickly removes large quantities of rubber. The fast removal of rubber along with the ease of use, helps minimize operator fatigue and permits a better control.

 

GOUGES
Cat. No. Description
S-2040 Rotary Gouge. 2", 50mm dia.,
1/2" arbor hole, 1 per box.
S-2042 Thin Wall Rotary Gouge.2", 50mm dia.,
3/8" arbor hole, no notch, 2 per box.
S-2043 Thin Wall Rotary Gouge. 2", 50mm dia.
1/2" arbor hole, with notch, 2 per box.
S-4042 Rotary Gouge, 11/4", 30mm dia.,
3/8" arbor hole, 3 per box
S-2046 Micro Rotary Gouge, 3/4", 20mm dia.
3/8" threaded arbor hole, 4 per box
S-2047 1 /2", 15mm to 3/8", 10mm reducer.

Wire Brushes

Omni wire brushes are made of high quality materials ,Encapsulated brushes help in removal of rubber around the steel cables.

 

WIRE BRUSHES
Cat. No. Description
S-890 Polyurethane Encapsulated Brush. To remove rubber around steel cables. 2",
50mm brush. 5000RPM"s max. 1/2", 13mm arbor hole with ", 9mm reducer.
S-892 Texture Brush. Removes scorched rubber in finished buzz outs. 3",
75mm brush. 5000 RPM's max. Contains two 2", 50mm flat washers to keep bristles firm. 
S-896 Skive Brush. Removes scorched rubber in skived area. 1/2",
13mm, .005wire. 4000 RPM's max.
S-897 Rubber Encapsulated Brush. To remove rubber surrounding steel cables. 2",
50mm. 5000 RPM's max. ", 9mm arbor hole.

 

Carbide Cutters & Burrs

 

CARBIDE CUTTERS
Cat. No. Description
270 CARBIDE CUTTER, 3", 75mm length for 1/8", 3mm injuries.
270 CARBIDE CUTTER, 4", 100mm length for 1/4", 6mm injuries.
270 CARBIDE CUTTER, 49/16", 120mm length for 3/8", 9mm injuries.
270 CARBIDE CUTTER, 5", 125mm length for 1/2", 13mm injuries.

DIAMOND CUT CUTTERS
Cat. No. Description Shaft Size
280 MINI POINTED CARBIDE BURR 11/4", 30mm 1/4",3mm
282 POINTED END CARBIDE BURR 1", 50mm length 1/4",3mm
283 MINI ROUTER CARBIDE BURR 11/2", 40mm length 1/8",3mm
284 ROUTER CARBIDE BURR 21/2", 65mm length 1/4",6mm
286 BALL SHAPED CARBIDE BURR 23/4", 70mm length 3/4", 20mm dia 1/8",6mm